No documented fault on file for the E8, so this is my best diagnostic — orientative but based on what we see most:.
2
**Most likely causes, in order:**.
3
**Charger fault** — the most common culprit.
4
The charger fails silently (no light, wrong light, stops mid-charge).
5
**Charging port damaged or dirty** — bent pin, oxidation, or a loose connector inside.
6
**BMS (battery protection board) triggered** — the BMS cuts off charging if the battery was over-discharged or had a fault.
7
Needs a reset or replacement.
8
**Battery cells dead** — less common, but possible if the scooter sat uncharged for a long time.
9
**Quick check — can you tell me:**.
10
- When you plug in the charger, does the charger **LED light up**? What color, and does it change at all?.
11
- Is the **charging port** on the scooter visually OK — no bent pins, no burn marks, fits snugly?.
12
This tells us straight away if it's the charger (cheapest, easiest) or something deeper inside the battery system.
13
⚠️ **Important:** if the issue is the BMS or battery cells, that's delicate work — risk of short circuit or fire if handled incorrectly.
14
I can get you the right part, but I'd strongly recommend having it done by a qualified tech.
15
Since you're in the Netherlands, I can **ship the part to you** — just let me know what the charger light does and I'll pinpoint exactly what you need 🔧.
Ficha técnica
Marca
Smartgyro
Modelo
E8
Avería
no carga
Votos útil
0
ID falla
#619
¿Te ha resultado útil?
Tu voto ayuda a otros técnicos a encontrar soluciones verificadas.
¿Tienes un taller?
Gestiona todas las reparaciones, comparte conocimiento y fideliza clientes con RuedaQrueda Pro.